Dealer Inside
Serial Reg Check
+44 (0)1789 491860

Sniper SHD

Locate your dealer

Literature download

Contact Spearhead

The Sniper SHD flail mower is designed for agricultural and municipal use giving a high quality and consistent cut in material up to 80mm. It is the perfect choice for intense use farmers and professional operators such as contractors and local authorities.

This highly robust machine features heavy duty hammer flails fitted on an electronically balanced rotor mounted on enclosed, self-aligning bearings. Belt drive gives reliable power transmission in challenging conditions and a 194mm full width adjustable, self-cleaning rear roller with scraper will ensure a quality cut and well distributed finish; even in the most intense terrain.

The Sniper SHD range is available in a choice of working widths between 2.1 and 2.8 metres with operating flexibility offered by a 400mm hydraulic side shift that allows work around trees and other obstructions. The machine can also be front or rear mounted thanks to a reversible headstock.

AGRICULTURE
PASTURE
AMENITY
LIGHT SCRUB
HEAVY SCRUB
AIRFIELD
HIGHWAYS
WATERWAYS

Features

Sniper SHD Flail Mower features

Specifications

Sniper 210 SHD

Minimum weight guide: 5500kg (12125lbs)
Machine weight*: 1050kg (2315lbs)
Hitch: Cat 2 with floating clevis top link
Hitch position: Front and rear mount
Cutting width: 2.10m (6′ 11″)
Overall width:2.30m (7′ 7″)
Overall length: 1.20m (3′ 11″)
Cowl height**: 540mm (1′ 10″)
Cutting height: 35mm – 123mm (1 3/8″ – 4 3/16″)
Cutting capacity: 80mm (3 3/16″)
Maximum offset distance: 400mm (1′ 4″)
Offset type: Hydraulic
Recommended Tractor HP: 60 – 120hp (45 – 90kW)
Power take-off speed: 540 / 1000rpm
Gearbox: Cast iron housing with integrated enclosed connecting shaft
Input shaft: 1 3/8″ Z6
Gearbox lubricant: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity: 2.3 litres (4.0 pints)
Belt quantity: 5
Cowl construction: All welded construction
Skid construction: Replaceable bolt-on skid
Flail: Heavy-duty hammer flail
Flail quantity: 23
Flail tip speed: 50m/s (9842 fpm)
Rotor diameter: 168mm (6 5/8″)
Roller diameter: 194mm (7 5/8″)
*Weights may vary dependent on machine type and specification
**Top of cowl to floor

Sniper 250 SHD

Minimum weight guide: 5500kg (12125lbs)
Machine weight*: 1150kg (2535lbs)
Hitch: Cat 2 with floating clevis top link
Hitch position: Front and rear mount
Cutting width: 2.50m (8′ 2″)
Overall width:2.80m (9′ 2″)
Overall length: 1.20m (3′ 11″)
Cowl height**: 540mm (1′ 10″)
Cutting height: 35mm – 123mm (1 3/8″ – 4 3/16″)
Cutting capacity: 80mm (3 3/16″)
Maximum offset distance: 400mm (1′ 4″)
Offset type: Hydraulic
Recommended Tractor HP: 70 – 130hp (52 – 97kW)
Power take-off speed: 540 / 1000rpm
Gearbox: Cast iron housing with integrated enclosed connecting shaft
Input shaft: 1 3/8″ Z6
Gearbox lubricant: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity: 2.3 litres (4.0 pints)
Belt quantity: 5
Cowl construction: All welded construction
Skid construction: Replaceable bolt-on skid
Flail: Heavy-duty hammer flail
Flail quantity: 25
Flail tip speed: 50m/s (9842 fpm)
Rotor diameter: 168mm (6 5/8″)
Roller diameter: 194mm (7 5/8″)
*Weights may vary dependent on machine type and specification
**Top of cowl to floor

Sniper 280 SHD

Minimum weight guide: 5500kg (12125lbs)
Machine weight*: 1230kg (2712lbs)
Hitch: Cat 2 with floating clevis top link
Hitch position: Front and rear mount
Cutting width: 2.80m (9′ 2″)
Overall width:3.00m (9′ 10″)
Overall length: 1.20m (3′ 11″)
Cowl height**: 540mm (1′ 10″)
Cutting height: 35mm – 123mm (1 3/8″ – 4 3/16″)
Cutting capacity: 80mm (3 3/16″)
Maximum offset distance: 400mm (1′ 4″)
Offset type: Hydraulic
Recommended Tractor HP: 80 – 130hp (60 – 97kW)
Power take-off speed: 540 / 1000rpm
Gearbox: Cast iron housing with integrated enclosed connecting shaft
Input shaft: 1 3/8″ Z6
Gearbox lubricant: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity: 2.3 litres (4.0 pints)
Belt quantity: 5
Cowl construction: All welded construction
Skid construction: Replaceable bolt-on skid
Flail: Heavy-duty hammer flail
Flail quantity: 27
Flail tip speed: 50m/s (9842 fpm)
Rotor diameter: 168mm (6 5/8″)
Roller diameter: 194mm (7 5/8″)
*Weights may vary dependent on machine type and specification
**Top of cowl to floor


Locate your dealer

Literature download

Contact Spearhead

Back To Top
Search