Overview
A specialised evolution of a popular machine, Multicut 480 Army has everything to handle life in the military arena.
Front nudge bars provide additional pushing power, driving dense material into the cutting chamber. A bespoke ‘stump jumper’ blade pan with slashing blades improves cutting in the toughest environments, and foam-filled wheels keep you moving.
Working with military customers, we’ve thought of everything. Such as enhanced slip clutch protection, specialist hydraulic lines, and independent lift. This
ultra-hardy mower is ready to serve.
- A specialist Multicut 480 for military use.
- Tackles everything – even minor blast impacts.
- Modified blade system delivers cutting at speed.
| AGRICULTURE |
| PASTURE |
| LIGHT SCRUB |
| HEAVY SCRUB |
| STUBBLE MANAGEMENT |
| AIRFIELD |
| HIGHWAYS |
Features
Specifications
Machine weight*: 2690kg (5930lbs)
Hitch: Multi-positional drawbar
Cutting width: 4.60m (15′ 1″)
Transport machine width: 2.70m (8′ 11″)
Working machine width: 4.79m (15′ 9″)
Maximum working length: 4.91m (16′ 2″)
Transport length: 4.83m (15′ 11″)
Transport height: 2.06m (6′ 9″)
Deck height**: 0.23m (9″)
Cutting height: 25mm – 400mm (1″ – 16″)
Cutting capacity: 100mm (4″)
Wing working angles: 45° up / 15° down
Recommended tractor HP: 100hp (75kW)
Power take-off speed: 1000rpm
Gearbox(es): 4 x Cast Iron housing
Gearbox rating: 250hp (186kW) & 165hp (123kW)
Input shaft: 1 3/8″ Z21 or Z6 SFT 8 tractor end
Gearbox lubricant [splitter]: EP80-90W or GL-4 (GL-5 oil)
Gearbox lubricant [rotor]: 85W-140 oil
Gearbox oil capacity [splitter gearbox]: 2.7 litres (4.7 pints)
Gearbox oil capacity [centre gearboxes]: 4.3 litres (7.6 pints)
Gearbox oil capacity [rotor gearboxes]: 2 x 4.3 litres (7.6 pints)
Deck construction: All welded construction
Deck material thickness: 6mm (1/4″)
Side skirt material thickness: 5mm (3/16″)
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish: 6mm (1/4″) round pan with blade holder bar
Dishpan: 6mm (1/4”) round pan with blade holder bar
Number of rotors: 3
Blades Standard (x9): 9 x 10mm (3/8″) 30 Carbon Boron hardened and tempered. Free swinging high lift – low friction. Handed.
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed: 80mps (15748fpm)
Driveline: ASAE Category 4
Driveline protection: 2-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels: 8 x 21×9 14 PLY foam-filled pneumatic tyre with steel rim
Front guard: Single chain guards on each deck with nudge bar and rubber flap
Rear guard: Single chain guards on each deck
* Weight may vary dependent on machine specification
** Underside of deck to skid
** Underside of deck to skid