Overview
A larger “beefed up” model, the 750 gives you everything the 730 offers with additional durability.
Cutting 7.3 metres at speed, the 225HP gearbox is always one step ahead. And five rotors eat into your stubble in whistlestop time. Half the blades are angled to achieve a double cut, flaring the chopped material to mix with soil dust before spreading evenly.
This is a heavy-duty Hardox steel-decked machine you can depend on. Backed by our 7-year gearbox warranty, this unit takes rotary mowing to the next level.
- A heavy-duty wide area machine.
- 225HP driveline for additional power.
- Hard wearing specification.
| AGRICULTURE |
| PASTURE |
| LIGHT SCRUB |
| HEAVY SCRUB |
| STUBBLE MANAGEMENT |
| AIRFIELD |
| HIGHWAYS |
Features
Standard Specification
Machine weight*: 5500kg (12125lbs)
Hitch: Multi-positional drawbar
Cutting width: 7.29m (23′ 11″)
Transport machine width: 2.56m (8′ 5″)
Working machine width: 7.53m (24′ 9″)
Maximum working length: 6.48m (21′ 4″)
Transport length: 6.41m (21′ 4″)
Transport height: 3.44m (11′ 4″)
Deck height**: 0.33m (1′ 1″)
Transport height: 2.94m (9′ 8″)
Cutting height: 25mm – 400mm (1″ – 16″)
Cutting capacity: 100mm (4″)
Recommended tractor HP: 160hp / 119kW
Wing working angles: 30° up / 7.5° down
Power take-off speed: 1000 rpm
Gearbox(es): 6 x Cast iron housing
Input shaft: 1 3/8″ Z21 or Z6 SFT 8 tractor end or 1″ 3/4 Z20 or Z6 SFT 8 tractor end
Gearbox lubricant [rotor]: 85W-140 oil
Gearbox lubricant [splitter]: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity [splitter gearbox]: 1 x 2.7 litres (4.7 pints)
Gearbox oil capacity [rotor gearboxes]: 5 x TBC
Deck construction: All welded construction
Deck material thickness: 5mm (3/16″)
Side skirt material thickness: 5mm (3/16″)
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish: 5mm (3/16″) round pan with blade holder bar
Blades standard: 15 x 12mm (1/2″) 30 Carbon Boron hardened and tempered. Free swinging high lift – low friction. Handed.
Blades starcut: 15 x 12mm (1/2″) 30 Carbon Boron hardened and tempered. Free swinging low friction. Non-handed
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed: 81mps (15944fpm)
Driveline: ASAE Category 8
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels: 8 x 265/70 R16.5 stubble resistant tyre with steel rim on rear
Front guard: Single chain guards on each deck
Rear guard: Single chain guards on each deck
*Weights may vary dependent on machine specification
**Underside of deck to skid
**Underside of deck to skid