Overview
We designed this model with ultimate durability in mind. A heavy-duty mower, it’s also ideal for wetter land and stubble management.
Eight wide rugged wheels, hydragas suspension, and a high-strength walking axle improve floatation on tricky terrain. Tackling 6.4 metres in one pass, five rotors operate our six-blade Starcut system. This is performance personified.
Easy to maintain, you’ll welcome the flat topskin and single splitter gearbox guard. Plus, the wings fold to over-centre for stable road transportation.
- Heavy-duty performance mower and stubble manager.
- Enhanced floatation.
- Easy maintenance features.
| AGRICULTURE |
| PASTURE |
| LIGHT SCRUB |
| HEAVY SCRUB |
| STUBBLE MANAGEMENT |
| AIRFIELD |
| HIGHWAYS |
Features
Standard Specification
Machine weight*: 3550kg (7826lbs)
Hitch: Multi-positional drawbar
Cutting width: 6.38m (20′ 11″)
Working machine width: 6.58m (21′ 7″)
Transport machine width: 2.46m (8′)
Maximum working length: 6.12m (20′ 1″)
Transport length: 6.03m (19′ 10″)
Deck height**: 0.23m (9″)
Transport height: 2.94m (9′ 8″)
Cutting height: 25mm – 400mm (1″ – 16″)
Cutting capacity: 100mm (4″)
Wing working angles: 45° up / 15° down
Recommended tractor HP: 90hp / 67kW
Power take-off speed: 1000 rpm
Gearbox(es): 6 x Cast iron housing
Input shaft: 1 3/8″ Z21 or Z6 SFT 8 tractor end
Gearbox lubricant [rotor]: 85W-140 oil
Gearbox lubricant [splitter]: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity [splitter gearbox]: 2.7 litres (4.7 pints)
Gearbox oil capacity [centre gearbox]: 4.3 litres (7.6 pints)
Gearbox oil capacity [rotor gearboxes]: 4 x 4.3 litres (7.6 pints)
Deck construction: All welded construction
Deck material thickness: 5mm (3/16″)
Side skirt material thickness: 5mm (3/16″)
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish: 6mm (1/4″) round pan with blade holder bar
Blades standard: 15 x 12mm (1/2″) 30 Carbon Boron hardened and tempered. Free swinging high lift – low friction
Blades starcut: 15 x 12mm (1/2″) 30 Carbon Boron hardened and tempered. Free swinging low friction – Non-handed
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed: 79mps (15551fpm)
Driveline: ASAE Category 9
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels***: 10.0 / 80 x 12 – AW – 909 TL 10 PLY pneumatic tyre with steel rim***
Front guard: Single chain guards on each deck
Rear guard: Single chain guards on each deck
*Weights may vary dependent on machine specification
**Underside of deck to skid
***Standard fitment, other options available
**Underside of deck to skid
***Standard fitment, other options available